|
General Inspection
- Print text/detail - Wrong type/wrong text/text missing are not allowed.
- Registration - The registration must conform to the tolerance limit.(±2mm)
- Lamination - The finished goods should have a good fibre tear.
- Colour shade - The colour shade must comply to the customer requirements.
- Slotting/die-cut - The finish goods should show a sharp cutting edge.
- Creasing - No crease line, shallow, creasing cut through are allowed.
- Carton forming- Cartons must be properly formed.
- Side joint - No overlapping, excess material or side joint allowed.
- Flute - Finished goods with damaged, wrong direction, or wrong type are not allowed.
- Scanability - Barcode should show the correct customer code and readable by barcode scanner.
- Rub resistant - Fininsh goods must have good scuffing resistant.
- Gluing/Stitching - Excess glue/no glue or joint break are not allowed.
- Dimension - The finished goods dimension must comply to customer specifications.
|
|
|
Test Parameter |
|
|
|
|
|
 |
|
